Energy demand analysis of mechanized transplanting system of tomato

Autores

  • Túlio de Almeida Machado Instituto Federal Goiano - Campus Morrinhos
  • Fábio Lúcio Santos Universidade Federal de Viçosa
  • Domingos Sárvio Magalhães Valente Universidade Federal de Viçosa
  • Haroldo Carlos Fernandes Universidade Federal de Viçosa
  • Marconi Ribeiro Furtado Júnior Universidade Federal de Viçosa

DOI:

https://doi.org/10.15361/1984-5529.2016v44n4p502-512

Resumo

Tomato culture has great importance among vegetable crops, and Brazil is the 5th largest producer worldwide. Faced with an increasing mechanization in this culture, this study aimed at evaluating the energy demand in fertilization and transplanting operations to the implementation of tomato crop. The study was conducted at Santa Rosa farm, in the municipality of Morrinhos - GO. The experimental design was a randomized block with four replications, combined three displacement speeds and three engine speeds in each operation.  The traction force, the power in draw bar, and time, specific and operational fuel consumptions were evaluated. The results showed that traction force and power had greater influence with increasing displacement speed. The traction force and power in fertilization operation were influenced by the depth of shanks. The power demand of mechanized sets has been changed by displacement speed, where used tractors proved to be oversized. There was a lower operational fuel consumption in the two fertilization and transplanting operations due to tractor over sizing.

Biografia do Autor

Túlio de Almeida Machado, Instituto Federal Goiano - Campus Morrinhos

Professor do departamento de Agropecuária da área de mecanização agrícola

Fábio Lúcio Santos, Universidade Federal de Viçosa

Professor do departamento de engenharia agrícola com linha de pesquisa em mecanização agrícola

Domingos Sárvio Magalhães Valente, Universidade Federal de Viçosa

Professor do departamento de engenharia agrícola com linha de pesquisa em mecanização agrícola

Haroldo Carlos Fernandes, Universidade Federal de Viçosa

Professor do departamento de engenharia agrícola com linha de pesquisa em mecanização agrícola

Marconi Ribeiro Furtado Júnior, Universidade Federal de Viçosa

Doutorando em  engenharia agrícola com linha de pesquisa em mecanização agrícola pela UFV

Arquivos adicionais

Publicado

11/11/2016

Como Citar

MACHADO, T. de A.; SANTOS, F. L.; VALENTE, D. S. M.; FERNANDES, H. C.; JÚNIOR, M. R. F. Energy demand analysis of mechanized transplanting system of tomato. Científica, Dracena, SP, v. 44, n. 4, p. 502–512, 2016. DOI: 10.15361/1984-5529.2016v44n4p502-512. Disponível em: https://cientifica.dracena.unesp.br/index.php/cientifica/article/view/712. Acesso em: 28 mar. 2024.

Edição

Seção

Engenharia Rural/Agrícola - Rural/Agricultural Engineering

Artigos mais lidos pelo mesmo(s) autor(es)